We ship to Belgium, Germany, Italy, Switzerland, UK, Luxembourg, Spain, Finland, Norway, Denmark, if you're not on this list please contact us, we ship worldwide. Personal customers outside EU must contact us for VAT exemption & shipping.
Walther GSP cal .32 Brass catcher
Set comprising :
- 1 Brass catcher net with articulated head,
- 1 Net support for magazine,
- Notice,
- Carrying pouch.
Stainless steel fitting.
Parts made in 3D printing.
Note: The ejection of the casings is not r ... (Lire la suite)
à partir de 11,00 €
1
Walther GSP 500 cal .32 Brass catcher
Set comprising :
- 1 Brass catcher net with articulated head,
- 1 Net support for magazine,
- Notice,
- Carrying pouch.
Stainless steel fitting.
Parts made in 3D printing.
Note: The ejection of the casings is not r ... (Lire la suite)
à partir de 11,00 €
1
Tesro cal .32 Brass catcher
For use at 25 m with the Tesro pistol.
Set comprising :
- 1 Brass catcher net with articulated head,
- 1 Net support for magazine,
- Notice,
- Carrying pouch.
Stainless steel fitting.
Parts made in 3D printing.
Pl ... (Lire la suite)
à partir de 11,00 €
1
Primer catcher/case ejector RCBS IV
The kit includes a primer catcher and case ejector.
Used for the rapid defusing of handgun / rifle casings.
Also suitable for reloading short and medium bullet case.
Contain a 16 cm pipe, a plug, the additional M10 screws.
... (Lire la suite)
49,50 €
1
Pardini HP .32 - Magazine speedloader
Useful accessory to take care of your fingers.
Parts made in 3D printing.
Magazine not included.
28,50 €
1
Pardini cal .32 Brass catcher
For use at 25 m with the Pardini pistol.
Set comprising :
- 1 Brass catcher net,
- 1 Net support for magazine,
- Notice,
- Carrying pouch.
Stainless steel fitting.
Parts made in 3D printing.
Please observe the ins ... (Lire la suite)
à partir de 10,00 €
1
Pardini cal .22 Brass catcher
For use at 25 m with the Pardini pistol.
Set comprising :
- 1 Brass catcher net,
- 1 Net support for magazine,
- Notice,
- Carrying pouch.
Parts made in 3D printing.
Please observe the instructions for use (see users ... (Lire la suite)
43,90 €
1
Pardini bracket for Scatt
For use at 25 m with the Pardini pistol (SPNew & HP32 and Bullseye edition)
.
Comes with 4 Scatt dovetail holders.
- N°0 - fixed Medium position.
- N°05 -tilting 0.5 ° up and down.
- N°1 - tilting 1 ° up and down. ... (Lire la suite)
45,00 €
1
Pair of Black & White spools for ø3/4" (ø19 mm) pa
- Dispensers made on ABS plastic injection.
- Reusable, long life use.
- For 1000 target pasters rolls *
- Can be assembled back to back using a clip provided.
- Internal dimensions ø79 mm (3") x 24,6 mm (31/32").
- Cen ... (Lire la suite)
23,10 €
1
Pair of Black & White dispensers with pasters ø19x
- Dispensers made on ABS plastic injection,
- For 1000 target pasters rolls
- Can be assembled back to back using the double-sided patches provided.
- Internal dimensions ø79 mm x 25 mm.
- One roll of 1000 white pasters ø19.
... (Lire la suite)
29,30 €
1
Morini bracket for Scatt
For use at 10 m with Morini air pistols.
Version for CM162 Standard and Titanium.
Version for CM200 ø29,90 mm.
If you have the possibility, please check the
diameter of your bottle.
Supplied with 1 support (CM200) ... (Lire la suite)
à partir de 26,40 €
1
IPSC 24 mm Dispensers
For target pasters rolls ø24 mm x 2000.
This product is manufactured in 3D printing.
Internal dimensions ø110 mm x 28 mm.
... (Lire la suite)
à partir de 25,00 €
1
Hammerli SP20 cal .32 Brass catcher
Set comprising :
- 1 Brass catcher net with articulated head,
- 1 Net support for magazine,
- Notice,
- Carrying pouch.
Stainless steel fitting.
Parts made in 3D printing.
Note: The ejection of the casings is not r ... (Lire la suite)
à partir de 11,00 €
1
Hammerli 280 cal .32 Brass catcher
Set comprising :
- 1 Brass catcher net with articulated head,
- 1 Net support for magazine,
- Notice,
- Carrying pouch.
Stainless steel fitting.
Parts made in 3D printing.
Note: The ejection of the casings is not r ... (Lire la suite)
à partir de 11,00 €
1
Hammerli .32 - Magazine speedloader
For SP20 - 280 models.
Useful accessory to take care of your fingers.
Parts made in 3D printing.
Magazine not included.
28,50 €
1
Accessories for 19 mm spool
The essential
accessory to keep them close to you.
- 3D printed,
- Stainless steel fitting.
... (Lire la suite)
à partir de 5,40 €
1
*Gardez vos rouleaux en bon état
EasyPasters® is a Trademark of Cap Creation SAS-Brevet FR 17 70407